nach oben
  • VARIO III
    VARIO III
  • folding tool
    folding tool
  • edges and rollers
    edges and rollers
  • Hydraulic unit
    Hydraulic unit
Profile bending machines belong to the basic equipment of metal craft operation. For generations, these machines remain large, heavy, inflexible and expensive. With the Vario-bender, the company Gelber-Bieger has revolutionized this type of machine in all these points. The Vario-bender adapts to the specific needs of the various metal trades and is universally applicable depending on features, small and mainly favorable. For smaller start-ups but also larger companies, this machine can also be perfectly used on construction sites. Previous known Profile benders could not be changed by the customer. They did not have the ability to upgrade. If the existing machine had only two driven shafts, but three driven shafts (to bend, for example spiral) were needed, it could not be changed. This has changed: With the different versions of the Vario-bender, it provides maximum flexibility because it can be adapted to the exact needs of the customers. 
 
For many companies, the use of a pure bending machine is not worthwhile in spite of the low entry price because they "only" bend tubes or profiles and the machine is often underutilized. Again, the company GELBER-BIEGER offers an optimal extension of potential applications. Because the Vario-bender can be rebuilt from a profile bender to a press bender for flat iron and round material. 
 
With just a few simple steps and loosening some screws the Vario Bender 3 the profile bending unit can be removed and a folding tool can be mounted. With a bending capacity of up to 15 mm thick and 100 mm high flat iron, this machine is an enormous help in bending the metal. 
 
Apart from the conversion to folding, the Vario-bender also includes the ability to use all the tools the company Gelber-Bieger designed for Mobi-bender: for example, the turntable and devices for cutting, notching, expanding ...
general request
Use the desktop version of the website to request prices directly online.

Retrofit Kit for Profile Bending Tool for Vario

For converting Vario III to Vario II 
Hydraulic with 2 
driven shafts
3 clamping bolt 
1 roll set 1 "
Retrofit Kit for Profile Bending Tool for Vario

Biegerollen aus Polyamid 3/4", 27,1 mm

zum Ringbiegen von Rundrohr
Welle 40 mm, Passfeder 10 mm
(1 Satz = 3 Rollen)

Biegerollen aus Polyamid 3/4

Bendingrolls Polyamide 1", 34,0 mm

for ring bending of round tubes 

Shaft 40 mm, 10 mm Featherkey 

(1 set = 3 rolls)

Bendingrolls Polyamide 1

Bendingrolls Polyamide 1 1/4", 42,7 mm

for ring bending of round tubes 

Shaft 40 mm, 10 mm Featherkey 

(1 set = 3 rolls)

Bendingrolls Polyamide 1 1/4

Bendingrolls Polyamide 1 1/2", 48,6 mm"

for ring bending of round tubes 

Shaft 40 mm, 10 mm Featherkey 

(1 set = 3 rolls)

Bendingrolls Polyamide 1 1/2

Bendingrolls Polyamide 2", 60,7 mm

for ring bending of round tubes 

Shaft 40 mm, 10 mm Featherkey 

(1 set = 3 rolls)

Bendingrolls Polyamide 2

Bendingrolls Polyamide custom made size XX mm

Special fabrication on customer

for ring bending of round tubes 

Shaft 40 mm, 10 mm Featherkey 

(1 set = 3 rolls)

Bendingrolls Polyamide custom made size XX mm

Bendingrolls Steel 3/8", 17,4 mm

for ring bending of round tubes 

Shaft 40 mm, 10 mm Featherkey 

(1 set = 3 rolls)

Bendingrolls Steel 3/8

Bendingrolls Steel 1/2", 21,7 mm

for ring bending of round tubes 

Shaft 40 mm, 10 mm Featherkey 

(1 set = 3 rolls)

Bendingrolls Steel 3/4", 27,1 mm

for ring bending of round tubes 

Shaft 40 mm, 10 mm Featherkey 

(1 set = 3 rolls)

Bendingrolls Steel 3/4

Bendingrolls Steel 1", 34,0 mm

for ring bending of round tubes 

Shaft 40 mm, 10 mm Featherkey 

(1 set = 3 rolls)

Bendingrolls Steel 1

Bendingrolls Steel 1 1/4", 42,7 mm"

for ring bending of round tubes 

Shaft 40 mm, 10 mm Featherkey 

(1 set = 3 rolls)

Bendingrolls Steel 1 1/4

Bendingrolls Steel 1 1/2", 48,6 mm

for ring bending of round tubes 

Shaft 40 mm, 10 mm Featherkey 

(1 set = 3 rolls)

Bendingrolls Steel 1 1/2

Bendingrolls Steel 2", 60,7 mm

for ring bending of round tubes 

Shaft 40 mm, 10 mm Featherkey 

(1 set = 3 rolls)

Bendingrolls Steel 2

Bendingrolls Steel custom made size XX mm

Special fabrication on customer

for ring bending of round tubes 

Shaft 40 mm, 10 mm Featherkey 

(1 set = 3 rolls)

Bendingrolls Steel custom made size XX mm

Profile Bendingrolls Stainless Steel

Bendingrolls Polyamide 

Shaft 40 mm, 10 mm Featherkey

Profile Bendingrolls Stainless Steel

Profile Bendingrolls Steel

Bendingrolls Polyamide 

Shaft 40 mm, 10 mm Featherkey

Additional Kit for VARIO I² & II² to I³ & II³

for third driven shaft 
bestehent from: 
1 x hydraulic motor 
1 x Set of Hydraulikschläusche 
 
easy self installation
Additional Kit for VARIO I² & II² to I³ & II³
Handhebel
V 80mm
V 100mm
Matrizr für Kupfer
Schneiden
Aufweiten
Drehteller
AUsklinken
Multi V
Verstrebung
Werkzeug
Vario Oberteil
Multi V und Stempel
Beim Biegen
Zwei Techniken eine Maschine
Vario III
Vario ohne Hydraulik
Profilwalzensatz
Hubrolle
Wendelbiegen
Wendelbiegen
3. Angetriebene Welle
Vario mit 2 Angetriebenen Wellen
Handhebel
V 80mm
V 100mm
Matrizr für Kupfer
Schneiden
Aufweiten
Drehteller
AUsklinken
Multi V
Verstrebung
Werkzeug
Vario Oberteil
Multi V und Stempel
Beim Biegen
Zwei Techniken eine Maschine
Vario III
Vario ohne Hydraulik

our tipp

The VARIO III is delivered fully operational. Most customers buy the additional 80 or 100 mm die.

similar machines

Mobi-Bieger 100
Mobi-Bieger 100
bending type:
Flat Iron, Tube bends, Round Material with Mandrel
to the product
Horizontal Press XS with 2 Workstations
Horizontal Press XS with 2 Workstations
bending type:
Flat Iron, Profiles, Tube bends, Round Material with Mandrel
to the product
Vario II² Profile Bending Machine
Vario II² Profile Bending Machine
bending type:
Flat Iron, Profiles, Tube bends
to the product