nach oben
  • 3 driven Shafts
    3 driven Shafts
  • Folding and rolling
    Folding and rolling
  • Spiral Bending
    Spiral Bending
Vario-Bieger ... FLEXIBLE BASIC EQUIPMENT ...
 
Profile bending machines belong to the basic equipment of metal craft operation. For generations, these machines remain large, heavy, inflexible and expensive. With the Vario-bender, the company Gelber-Bieger has revolutionized this type of machine in all these points. The Vario-bender adapts to the specific needs of the various metal trades and is universally applicable depending on features, small and mainly favorable. For smaller start-ups but also larger companies, this machine can also be perfectly used on construction sites. Previous known Profile benders could not be changed by the customer. They did not have the ability to upgrade. If the existing machine had only two driven shafts, but three driven shafts (to bend, for example spiral) were needed, it could not be changed. This has changed: With the different versions of the Vario-bender, it provides maximum flexibility because it can be adapted to the exact needs of the customers. 
 
For many companies, the use of a Profile Bending Machine is not worthwhile in spite of the low entry price because they "only" bend tubes or profiles and the machine is often underutilized. Again, the company GELBER-BIEGER offers an optimal extension of potential applications. Because the Vario-bender can be rebuilt from a profile bender to a press bender for flat iron and round material. 
 
With just a few simple steps and loosening some screws the Vario Bender 3 the profile bending unit can be removed and a folding tool can be mounted. With a bending capacity of up to 15 mm thick and 100 mm high flat iron, this machine is an enormous help in bending the metal. 
 
Apart from the conversion to folding, the Vario-bender also includes the ability to use all the tools the company Gelber-Bieger designed for Mobi-bender: for example, the turntable and devices for cutting, notching, expanding ...
general request
Use the desktop version of the website to request prices directly online.
Bending capacity 
 
Round tube: 48mm 
Flat Iron: 60 x 10 
Square: 30 x 30 
Power: 1.2 kW 
Weight: 250 kg 
Dimensions: 1200 x 800 x 1000 
Pressure: 10 T (220 bar) 
Shaft diameter: 40 mm 
Walzschwindigkeit: 9 U / min

Additional Set for VARIO I² & II² to I³ & II³

for third driven shaft 
bestehent from: 
1 x hydraulic motor 
1 x Set of Hydraulikschläusche 
 
easy self installation
Additional Set for VARIO I² & II² to I³ & II³

Bendingrolls Polyamide 3/4", 27,1 mm

For  ring bending of round tube

Shaft 40 mm, 10 mm keyway

(1 set = 3 rolls)

Bendingrolls Polyamide 3/4

Bendingrolls Polyamide 1", 34,0 mm

for  ring bending of round tube

Shaft 40 mm, 10 mm keyway

(1 set = 3 rolls)

Bendingrolls Polyamide 1

Bendingrolls Polyamide 1 1/4", 42,7 mm

for  ring bending of round tube

Shaft 40 mm, 10 mm keyway

(1 set = 3 rolls)

Bendingrolls Polyamide 1 1/4

Bendingrolls Polyamide 1 1/2", 48,6 mm"

for  ring bending of round tube

Shaft 40 mm, 10 mm keyway

(1 set = 3 rolls)

Bendingrolls Polyamide 1 1/2

Bendingrolls Polyamide 2", 60,7 mm

for  ring bending of round tube

Shaft 40 mm, 10 mm keyway

(1 set = 3 rolls)

Bendingrolls Polyamide 2

Bendingrolls Polyamide custom made size XX mm

Special fabrication on customer

for ring bending of round tubes 

Shaft 40 mm, 10 mm Featherkey 

(1 set = 3 rolls)

Bendingrolls Polyamide custom made size XX mm

Bendingrolls Steel 3/8", 17,4 mm

for ring bending of round tubes 

Shaft 40 mm, 10 mm Featherkey 

(1 set = 3 rolls)

Bendingrolls Steel 3/8

Bendingrolls Steel 1/2", 21,7 mm

for ring bending of round tubes 
Shaft 40 mm, 10 mm Featherkey 
(1 set = 3 rolls)
 

Bendingrolls Steel 3/4", 27,1 mm

for ring bending of round tubes 

Shaft 40 mm, 10 mm Featherkey 

(1 set = 3 rolls)

Bendingrolls Steel 3/4

Bendingrolls Steel 1", 34,0 mm

for ring bending of round tubes 

Shaft 40 mm, 10 mm Featherkey 

(1 set = 3 rolls)

Bendingrolls Steel 1

Bendingrolls Steel 1 1/4", 42,7 mm"

for ring bending of round tubes 

Shaft 40 mm, 10 mm Featherkey 

(1 set = 3 rolls)v

Bendingrolls Steel 1 1/4

Bendingrolls Steel 1 1/2", 48,6 mm

for ring bending of round tubes 

Shaft 40 mm, 10 mm Featherkey 

(1 set = 3 rolls)

Bendingrolls Steel 1 1/2

Bendingrolls Steel 2", 60,7 mm

for ring bending of round tubes 

Shaft 40 mm, 10 mm Featherkey 

(1 set = 3 rolls)

Bendingrolls Steel 2

Bendingrolls Steel custom made size XX mm

Special fabrication on customer

for ring bending of round tubes 

Shaft 40 mm, 10 mm Featherkey 

(1 set = 3 rolls)

Bendingrolls Steel custom made size XX mm

Profile Bendingrolls Stainless Steel

Bendingrolls Polyamide 
Shaft 40 mm, 10 mm Featherkey
Profile Bendingrolls Stainless Steel

Profile Bendingrolls Stainless Steel

Bendingrolls Polyamide 
Shaft 40 mm, 10 mm Featherkey

Retrofit Kit for Folding for Vario II

For converting Vario Vario II to III, 
Punch, die adapter, template, Multi V, height plate, reinforcement for the foundation.
Retrofit Kit for Folding for Vario II
Transportrollen
NEU! mit Digitalanzeige
1\
Gebogenes Rohr
Hydraulikaggregat
Bedienhabel
Lineal
1\
Profilbiegeraufsatz
Profilbieger mit Zustellzylinder
Vario ohne Verkleidung
NEU! optional
Bending with 2 Driven Shafts
Kombi-Bieger and Vario work equally
Profile bender with Vario
Profilwalzensatz
Hubrolle
Wendelbiegen
Wendelbiegen
3. Angetriebene Welle
Vario mit 2 Angetriebenen Wellen
Transportrollen
NEU! mit Digitalanzeige
1\
Gebogenes Rohr
Hydraulikaggregat
Bedienhabel
Lineal
1\
Profilbiegeraufsatz
Profilbieger mit Zustellzylinder
Vario ohne Verkleidung
NEU! optional

our tipp

The Profile Bending Machine is delivered with a set of rollers for 1". "You do not have to immediately buy all the other bending rolls because we have 300 sets in stock and can supply all common sizes in 48 hours. 
 
 
With accessories this machine can easily make spiral bending.... Please contact us!