nach oben
  • Press Brake 835mm
    Press Brake 835mm
  • Back stop
    Back stop
  • Guide
    Guide
  • Tooling
    Tooling

 

... Small, Light, Powerful...
 
 
With this machine we present
 
a small, light, powerful and energy-efficient 
 
Press brake with an edge length of 1250 mm. 
The press brake GB 40-835 M is the 
Extent of 1.8 m (H), 1.1 m (t) and 1.4 m (b) one of 
most compact machine in this category, it 
is capable of edging up to a length of 835 mm. 
While usually such presses weigh up tp 3500 
kilograms, our press has a weight of
only 1200 kg and is likely the
Lightest on the market. The Weight and Dimensions 
guarantee a very high degree of flexibility, the 
Machine can be easily transported and fits 
through most doors. 
With 40 tons of bending force generated by two cylinders 
 - despite the compact and the 
low weight design - our press is one of  the strongest brakes 
that can be found in the press brake category.
The installation height for tools is rarely
up to 310 mm with the corresponding large parts 
you can edit or additionally integrate the 
optionally provided quick tool clamping system.
This press is equipped with Standard Stamp 
matrices from type Amada / Promecam. 
general request
Use the desktop version of the website to request prices directly online.
Press brake GB40 835 mm 
Crimping force: 40t 
Kant length: 835 mm 
Performance / Working pressure: 4.5 kW 
Bending speed: 10 mm / s 
2 cylinder 
Back gauge electrically adjustable from the front 
with counter 
Digital stroke adjustment 
Digital adjustable return stroke 
Pressure relief valve 
Weight: 1200 kg

To assemble this machine properly, you need the machine as well as  a set of clamps and tools.

Holder for Stamp

Clamping plate 75 mm, 6 pieces per set

Holder for Stamp

88 ° Multi-V (2030-835)

4V88 / 85 ° 
H 60 
Length 835 mm
88 ° Multi-V (2030-835)

88 ° Multi-V (2030-415)

4V88 / 85 ° 
H 60 
Length 415 mm
88 ° Multi-V (2030-415)

Stamp 60° - 1162, L=835

R = 0.8, H = 85 mm 
Max T / m = 40 
Length 835 mm
Stamp 60° - 1162, L=835

Stamp 60° - 1162, L=415

R = 0.8, H = 85 mm 
Max T / m = 40 
Length 415 mm
Stamp 60° - 1162,  L=415

configuration note

To assemble this machine properly, you need the machine as well as  a set of clamps and tools.

our tipp

For bending boxes you will need a sektioned punch! 
 
You can request a separate tool catalog from us: info@gelber-bieger.com

similar machines

Press Brake GB-40 1250 Manual
Press Brake GB-40 1250 Manual
bending type:
Metall Sheets
to the product
Press Brake AB 1250 NC
Press Brake AB 1250 NC
bending type:
Metall Sheets
to the product
Mobi-Bieger 100
Mobi-Bieger 100
bending type:
Flat Iron, Tube bends, Round Material with Mandrel
to the product