nach oben
  • With Accessory
    With Accessory
  • small parts
    small parts
  • compact
    compact
  • tube bender
    tube bender
Hand Bender HB XS Mini
 
… SMALL AND UNIVERSAL APPLICATION….
 
The Hand Bender HB XS Mini is the small brother of the Handbieger HB XS.
Both Benders have the same set up. For starters you can acquire a basic set and buy different add on sets.  
The available accessories is gradually with the demands on the device. 
 
The main feature of this bender is in the bending of wire and thin materials. 
We put a lot of effort in solving the problem with the realization of 
a length stop??. This is useable for almost all bends. 
 
An angle stop is also optionally available and can be adjusted very easy with help of a  screw with fine thread.
 
general request
Use the desktop version of the website to request prices directly online.
Bender capacity
 
16mm round iron aus Stahl
 
40 x 8 flat iron standing steel
 
20 x 8 laid
 
The bending capacity are highly dependent on the force of the operator at the hand bender. The bending capacity can thus vary greatly both upwards as well as downwards.
The Hand Bender HB XS Mini is the basic version of the bender with a hand lever, and a center 20 mm. Optional we recommend the length stop and the angle stop. 
 
You can attach the hand bender HB XS Mini on a 16 mm welding table. 
 
Our tip! Do not forget the bending center 30 mm if you want to use the spacer rings.

Length Stop

Length stop for adjusting the bending position

Length Stop

Bending Mandrel 20

Bending Mandrel Standard Ø 20 mm

Bending Mandrel 20

Bending Mandrel 30

Bending Mandrel Standard Ø 30 mm

Bending Mandrel 30

Bending Mandrel for small parts

Mandrel with 2 pins for very small parts

Bending Mandrel for small parts

eccentric lever

eccentric lever for clamping

eccentric lever

Spacer rings

Set of spacer rings (10 pieces) for use on the 30 mm mandrel. 
In sizes 40, 50, 60, 70, 80, 90, 100, 110, 120, 130 mm Ø
Spacer rings

Tube Bending Tool

Tube Bending Tool for bending a Tube with a diameter of 6, 8 and 10 mm

Tube Bending Tool

Angle Stop

Angle stop for adjusting the bending angle by means of a knurled screw

configuration note

The Hand Bender HB XS Mini is the basic version of the bender with a hand lever, and a center 20 mm. Optional we recommend the length stop and the angle stop. 
 
You can attach the hand bender HB XS Mini on a 16 mm welding table. 
 
Our tip! Do not forget the bending center 30 mm if you want to use the spacer rings.

similar machines

HB XXS
HB XXS
bending type:
Flat Iron
to the product
Universal Handbender XS  Handbender SET 1 with
Universal Handbender XS Handbender SET 1 with"Basic equipment"
bending type:
Flat Iron, Tube bends, Round Material with Mandrel
to the product
Mobi-Bieger 100
Mobi-Bieger 100
bending type:
Flat Iron, Tube bends, Round Material with Mandrel
to the product